Professional Flash

Canon SPEEDLITE EL-1 Specifications

Specifications

  • Notification Image

    Fast 0.1-0.9 sec1 recycle times

    Up to 170 full power flashes2 in a burst

  • Notification Image

    Rechargeable Li-ion battery

    Up to 335 shots at full power

  • Notification Image

    Guide number 60m4

    Light up distant subjects and large groups

  • Notification Image

    Weather-resistant construction

    Work confidently in poor conditions

  • Notification Image

    Wide range of power levels

    From full to 1/8192 power5, for maximum flexibility

  • Notification Image

    Built-in LED modelling light

    With colour temperature and brightness controls

  • Notification Image

    Active cooling system

    Shoot for longer without overheating

  • Notification Image

    Accurate battery level indicator3

    So you’ll know when to replace or recharge a battery

Specifications in detail

Power

Zoom

Flash Modes

Flash-Related Function

Wireless Flash

Flash Head Movement

AF Assist

Power Source

Miscellaneous

Accessories

Physical Specifications

  1. Guide number 60 measured for meters at ISO 100 and 200mm zoom head setting.
  2. Minimum flash output is 1/128 for high-speed sync or optical wireless transmission.
  3. At 23 degrees C, with the fan set to ON, and before reaching flash firing restriction Level 1, with no flash adapters fitted (bursts up to 160 full power flashes with the flash zoomed from 150-200mm).
  4. Shooting wirelessly (radio only) requires EL-1 as sender with a compatible camera.
  5. Without any obstructions between sender and receiver, and without external optical/radio interference. Arrangement of units and other external factors may affect the range/performance.
  6. Without any obstructions between sender and receiver, and without external optical/radio interference. Arrangement of units and other external factors may affect the range/performance.
  7. Indicates the remaining capacity of the internal battery only, not external power sources.
  8. 1/8192 to 1/1 power charging time required for firing.
  9. Attaching CP-E4N with Ni-MH batteries, reduces the recycle time to approx. 0.1-0.4sec and increases the number of full power flashes to approx. 680.
  10. Attaching CP-E4N with Ni-MH batteries, reduces the recycle time to approx. 0.1-0.4sec and increases the number of full power flashes to approx. 680.
  11. Attaching CP-E4N with Ni-MH batteries, reduces the recycle time to approx. 0.1-0.4sec and increases the number of full power flashes to approx. 680.
  12. With compatible cameras
  1. 1/8192 to 1/1 power charging time required for firing.
  2. At 23 degrees C, with the fan set to ON, and before reaching flash firing restriction Level 1, with no flash adapters fitted (bursts up to 160 full power flashes with the flash zoomed from 150-200mm)
  3. Indicates the remaining capacity of the internal battery only, not external power sources
  4. Guide number 60 measured for meters at ISO 100 and 200mm zoom head setting.
  5. Minimum flash output is 1/128 for high-speed sync or optical wireless transmission.