A river flowing through a landscape of mossy rocks.


How to control exposure

Exposure is a measurement of the amount of light hitting your camera’s sensor and determines how light or dark your picture looks. It can be controlled by shutter speed, aperture and ISO. Making adjustments to any of these not only affects your exposure but also the look of your photo.

Your camera can usually solve all your exposure needs using Auto modes. However, learning how the different elements affect your photos will give you the confidence to take manual control. The resulting images will then stand out from the rest.

This video explains how to use the aperture, shutter speed and ISO settings to get the right exposure and effect for your photo.


Aperture is the size of the hole in the lens through which light passes. Each lens has a range of aperture settings from large to small. Use Aperture Priority mode (Av) to control the aperture whilst still letting your camera look after overall exposure.

Aperture is measured as an f-number. Large apertures are expressed as small numbers, such as f/2.8, letting in more light and producing a shallow depth of field (increased blur beyond your point of focus). Small apertures are described by larger numbers, such as f/16, letting in less light and producing large areas in focus from foreground to background.

Related Articles
Improve your images with HDR photography


Improve your images with HDR photography

Learn how to combine multiple images of the same scene, to capture detail in both the lightest and darkest elements of a picture.

How to create stunning bokeh


How to create stunning bokeh

Follow these tips and tricks to give your backgrounds a beautiful blur.


These two shots are exposed similarly but with different apertures. See how using a small aperture for the image on the left creates a greater depth of field with lots of in-focus areas. Enlarging the aperture in the image on the right reduces the depth of field, so much less is in focus.

Shutter speed

Shutter speed is the length of time that light is allowed to fall on the sensor. It is expressed in seconds. Use Shutter Priority mode (Tv) to control the shutter speed whilst still letting your camera look after overall exposure.

Fast shutter speeds such as 1/1000s are used for freezing fast action such as flowing water. Slow shutter speeds are used for adding movement such as blurring flowing water in a stream.


Compare these two shots taken with very similar exposures but with different shutter speeds, see the effect of using a slow shutter speed on the flowing water. For long exposures you will need to use a tripod or support to prevent camera shake.


ISO sets the light sensitivity of the sensor. It can therefore be used to amplify the light hitting the sensor allowing greater flexibility with shutter speed and aperture. The ISO typically starts at a figure of 100 and rises as the sensitivity increases.

ISO can also deteriorate the image quality in the form of grain, or noise, in your images and muted colours. It’s generally best to use the lower ISO settings if possible.


The scene on the right is a lot darker than the one on the left. To maintain a shutter speed fast enough to shoot without a tripod you will need to increase the ISO to compensate. This time to 1250, which hasn’t affected the picture quality unduly.

Adjusting exposure

Controlling exposure is a juggling act between these three settings. For example, increasing the shutter speed to freeze fast action may underexpose your image. To compensate you need to increase the aperture. Similarly, decreasing your aperture to maximise front-to-back focus will require a reduction of the shutter speed. You can also use the ISO to maintain exposure. You will often see this relationship illustrated as the exposure triangle.

The Exposure Compensation dial enables you to lighten or darken your picture. A minus figure will decrease the exposure and darken the image, a positive number increases the exposure to lighten it.


These two shots have clearly different exposures despite the same amount of light in the scene. The shot on the left is too dark or underexposed and the shot on the right is too light or overexposed. Using exposure compensation would correct the exposure.

Adjusting exposure in this way can be used for creative effect. Darken your images to increase mood and deepen colours especially in landscape photography. Increasing your exposure will brighten the shadows and produce a more modern feel.

Exposure bracketing enables you to capture a scene at a number of exposures and choose which one works best afterwards. Choose between 1 and 3 stops on the exposure scale and allow the camera to make the necessary adjustments to your settings.

Next time you take your camera out, try experimenting with the different settings and see for yourself the changes it can make to your photos.

Related Products

Related Articles

Get Inspired is your key source of useful photography tips, buyer’s guides and insightful interviews – everything you need to find the best camera or the best printer, and make your next creative idea come to life.

Back to all Tips & Techniques