4/6/8-channel piezoelectric inkjet system using VariaDot® imaging technology; with one 636-nozzle, variable droplet printhead per channel.
1340 XT: CMYK 1360 XT: CMYK+WW/V 1380 XT: CMYK+WW/V +cm
Variable droplet sizes from 6 to 42 picoliters. The ability to vary the drop size to 6 picoliters produces sharp images with smoother gradients and quartertones. The ability to jet larger droplets up to 42 picoliters produces uniform colors. The result is near-photographic quality with sharpness only before seen at resolutions of 1.440 dpi or higher. Text as small as 2 pt. is perfectly legible (with High Definition mode).
|Print Modes||Arizona 13x0 XT||Flatbed||RMO|
|1340 XT||1360 XT||1380 XT||m2/h||ft2/h||m2/h||ft2/h|
|Varnish (High Gloss)||o||o||~5||53.8||n.a.||n.a.|
IJC357 UV-curable inks packed in quick-change, 2 liter bags for: Black, Cyan, Magenta, Yellow, Light Cyan, Light Magenta. White and Varnish packed in 1 liter bags.
True flatbed for rigid media printing with available Roll Media Option for flexible media printing.
|Measured Over||Maximum Error|
|Line length (system width)||2,500 mm||2,190 mm||± 0.8 mm||± 0.6 mm|
|Line length (system height)||3,080 mm||2,000 mm||± 1.0 mm||± 1.5 mm|
|Line straightness (system width)||2,500 mm||2,190 mm||0.7 mm||0.7 mm|
|Line straightness (system height)||3,080 mm||2,000 mm||0.7 mm||2.0 mm|
|Diagonal Error (“square-ness”)||3,080x2,500 mm||2,000x2,190 mm||1.0 mm||2.5 mm|
Maximum Area: 308 x 250 cm / 121.3 x 98.4 inches (320 x N cm permitted w/308 cm vacuum)
Maximum Thickness: 50.8 mm / 2.0 inches
Maximum Mass: 34 kg/m2 / 7 lbs/ft2
Up to: 309 x 251 cm / 121.7 x 98.8 inches (321 x N cm permitted w/308 cm vacuum)
90 to 220 cm / 35.4 to 86.6 inches. Up to 50 kg / 110 lbs (at any width). Maximum diameter: 240 mm (9.45 inches). Core: 3 inches (inside). Bias: Print-side-in or print-side-out. Most types (application dependent)
Up to 219 cm / 86.2 inches
ONYX® Thrive™ 18 (421 configuration or greater recommended)
Arizona Xpert offers a unique tool set to save time and money in the creation of complex, multi-layered and duplex applications. The “Arizona Xpert Resale license” and the “Add Arizona Xpert Permission” are included with every Arizona 1300 printer and require ONYX Thrive to be installed.
2 x 200-240 VAC, 50/60 Hz, Single-phase, 16A per circuit
Circuit Breakers: North America: 20A. Europe: 16A. ROW: See CB Scheme Report
Clean, dry, compressed air using a Coalescing Filter. Pressure Regulator set to 690 kPa (100 psi) and connects air regulator to ½ inch or 12mm OD air tubing. Peak flow: 57 l/min at 690 kPa (2 cfm at 100 psi)
Temperature: 18˚ to 30˚ C (64˚ to 86˚ F)
Relative humidity: 30 to 70% (non-condensing)
Ventilation: 1.200 m3 per hour / 700 cfm minimum (see Site Preparation Guide)
Altitude: 2.750 m (9.020 feet) maximum, however some components specify a limit of 2.000 m (6.560 feet)
Printer only: 4.66 m x 3.83 m (183.5” x 150.8”), 1,660 kg (3,660 lbs.)
Printer + Roll Media Option: 4.66 m x 4.12 m (183.5” x 162.2”), 1,910 kg (4,211 lbs.)
Table height: 0.88 m (34.6”) / Overall height: 1.3 m (51.2”)