4/6/8-channel piezoelectric inkjet system using Océ VariaDot® imaging technology; with one 636-nozzle, variable droplet printhead per channel.
1340 XT: CMYK 1360 XT: CMYK+WW/V 1380 XT: CMYK+WW/V +cm
Variable droplet sizes from 6 to 42 picoliters. The ability to vary the drop size to 6 picoliters produces sharp images with smoother gradients and quartertones. The ability to jet larger droplets up to 42 picoliters produces uniform colors. The result is near-photographic quality with sharpness only before seen at resolutions of 1.440 dpi or higher. Text as small as 2 pt. is perfectly legible (with High Definition mode).
|Print Modes||Arizona 13x0 XT||Flatbed||RMO|
|1340 XT||1360 XT||1380 XT||m2/h||ft2/h||m2/h||ft2/h|
|Varnish (High Gloss)||o||o||~5||53.8||n.a.||n.a.|
Océ IJC357 UV-curable inks packed in quick-change, 2 liter bags for: Black, Cyan, Magenta, Yellow, Light Cyan, Light Magenta. White and Varnish packed in 1 liter bags.
True flatbed for rigid media printing with available Roll Media Option for flexible media printing.
|Measured Over||Maximum Error|
|Line length (system width)||2,500 mm||2,190 mm||± 0.8 mm||± 0.6 mm|
|Line length (system height)||3,080 mm||2,000 mm||± 1.0 mm||± 1.5 mm|
|Line straightness (system width)||2,500 mm||2,190 mm||0.7 mm||0.7 mm|
|Line straightness (system height)||3,080 mm||2,000 mm||0.7 mm||2.0 mm|
|Diagonal Error (“square-ness”)||3,080x2,500 mm||2,000x2,190 mm||1.0 mm||2.5 mm|
Maximum Area: 308 x 250 cm / 121.3 x 98.4 inches (320 x N cm permitted w/308 cm vacuum)
Maximum Thickness: 50.8 mm / 2.0 inches
Maximum Mass: 34 kg/m2 / 7 lbs/ft2
Up to: 309 x 251 cm / 121.7 x 98.8 inches (321 x N cm permitted w/308 cm vacuum)
90 to 220 cm / 35.4 to 86.6 inches. Up to 50 kg / 110 lbs (at any width). Maximum diameter: 240 mm (9.45 inches). Core: 3 inches (inside). Bias: Print-side-in or print-side-out. Most types (application dependent)
Up to 219 cm / 86.2 inches
ONYX® Thrive™ 18 (421 configuration or greater recommended)
Océ Arizona Xpert offers a unique tool set to save time and money in the creation of complex, multi-layered and duplex applications. The “Océ Arizona Xpert Resale license” and the “Add Arizona Xpert Permission” are included with every Océ Arizona 1300 printer and require ONYX Thrive to be installed.
2 x 200-240 VAC, 50/60 Hz, Single-phase, 16A per circuit
Circuit Breakers: North America: 20A. Europe: 16A. ROW: See CB Scheme Report
Clean, dry, compressed air using a Coalescing Filter. Pressure Regulator set to 690 kPa (100 psi) and connects air regulator to ½ inch or 12mm OD air tubing. Peak flow: 57 l/min at 690 kPa (2 cfm at 100 psi)
Temperature: 18˚ to 30˚ C (64˚ to 86˚ F)
Relative humidity: 30 to 70% (non-condensing)
Ventilation: 1.200 m3 per hour / 700 cfm minimum (see Site Preparation Guide)
Altitude: 2.750 m (9.020 feet) maximum, however some components specify a limit of 2.000 m (6.560 feet)
Printer only: 4.66 m x 3.83 m (183.5” x 150.8”), 1,660 kg (3,660 lbs.)
Printer + Roll Media Option: 4.66 m x 4.12 m (183.5” x 162.2”), 1,910 kg (4,211 lbs.)
Table height: 0.88 m (34.6”) / Overall height: 1.3 m (51.2”)